NO |
SUBJECT |
TITLE |
YEAR |
451 |
Spring steel |
Austenite grain coarsening behaviour in a medium carbon Si-Cr spring steel with and without vanadium |
2006 |
452 |
Squeeze cast |
Microstructure and strength of a squeeze cast aluminium piston alloy composite reinforced with alumina short fibre using al2o3 binder. |
2004 |
453 |
Squeeze cast |
Perform cracking in squeeze cast magnesium based composites –effects of tooling temperature. |
2004 |
454 |
Squeeze casting |
Study on mass effect of indirect squeeze cast 2014 wrought aluminum alloy. |
2006 |
455 |
Stainless steel |
Control of microstructure during the eutectoid transformation in the as-cast spheroidal graphite cast iron with "in-situ" dilatation analysis and quenching experiments. |
2006 |
456 |
Stainless steel |
Advances in the research of nitrogen containing stainless steels. |
2004 |
457 |
Stainless steel |
Stainless steels for exhaust lines. |
2006 |
458 |
Stainless steel |
Energy absorption behaviour of austenitic and duplex stainless steels in crash box geometry . |
2006 |
459 |
Stainless steels |
Hot mechanical properties of 24Cr-14 Ni high alloy billets. |
2006 |
460 |
Steel |
Fatigue of 8630 cast steel in the presence of porosity. |
2004 |
461 |
Steel |
Analysis of solute distribution during the solidification of low alloyed steels. |
2006 |
462 |
Steel |
Modeling of manganese sulphide formation during solidification ,part1:description of MnS formation parameters. |
2006 |
463 |
Steel |
A method for the calculation of retained austenite evolution heat –treatment of low –alloy TRIP-assisted steels . |
2006 |
464 |
Steel |
An assessment of vacuum- heat-treated H11 hot –work tool steel using the Klc /HRC ratio. |
2006 |
465 |
Steel |
Comparative study of oxide speciation in steel by inert gas fusion technique |
2006 |
466 |
Steel |
Crack in steel casting –a few case studies. |
2006 |
467 |
Steel |
A thermodynamic model of the EAF process for stainless steel. |
2006 |
468 |
Steel |
How can we reduce the variability in results from brinell hardness testing on quench and tempered steel casting. |
2006 |
469 |
Steel |
Hydrogen potential sources in refractory materials during steel casting . |
2006 |
470 |
Steel |
Discussion of theoretical methods to predict scale thickness in hot rolling strip of steel. |
2006 |
471 |
Steel |
Section of suitable tool materials and development of tool concepts for the thixoforging of steels. |
2006 |
472 |
Steel |
Constitutive equation for AIS140 steel applicable to a wide range of strain rates at elevated temperatures. |
2006 |
473 |
Steel |
Influence of soft reduction on internal quality of high carbon steel billets. |
2006 |
474 |
Steel |
Weld metal microstructure prediction in submerged arc weld metal of C-Mn steel. |
2006 |
475 |
Steel |
Identification of hibonite -5H in the characterization of inner SEN deposites. |
2006 |
476 |
Steel |
Development of cast igh strength microalloyed steels. |
2004 |
477 |
Steel |
Niobium in modern steels. |
2003 |
478 |
steel |
Elastic – plastic finite element analysis of sheet rolling using Co –rotational formulation . |
2006 |
479 |
steel |
Industry report :some highlights in new steel products for automotive use |
2006 |
480 |
Steel |
Microstructures and mechanical properties of high strength Fe-Mn-C light-weight TRIPLEX steels. |
2006 |
481 |
Steel |
Quench and partitioning steel: a new AHSS concept for automotive anti-intrusion application. |
2006 |
482 |
Steel |
Low alloyed TRIP-steels with optimized strength, forming and welding properties. |
2006 |
483 |
Steel |
Transformation textures in as-hot rolled TRIP steels. |
2006 |
484 |
Steel |
Formability of high strength dual –phase steels. |
2006 |
485 |
Steel |
Mechanical properties and bake hardening behaviour of two cold rolled multiphase sheet steels subjected to CGL heat treatment simulation . |
2006 |
486 |
Steel |
Bake hardening of hot rolled multiphase steels under biaxial pre-strained conditions . |
2006 |
487 |
Steel |
Niobium in engineering steels for automotive application . |
2006 |
488 |
Steel |
Strong and ductile martensitic steels for automotive application . |
2006 |
489 |
Steel |
Ti/Al interaction and austenite grain control in crankshaft manufacturing with 38 MnSiVS5 steel. |
2006 |
490 |
Steel |
Stability and constitutive modeling in multiphase TRIP steels. |
2006 |
491 |
Steel |
Deformation induced martensite formation and its effect on transformation induced plastiticity (TRIP). |
2006 |
492 |
Steel |
On the algorithmic implementation of a material model accounting foe the effects of martensitic transformation . |
2006 |
493 |
Steel |
Finite –element implementation of a material model accounting for the effects of matensitic transformation . |
2006 |
494 |
Steel |
Materials characterization for reliable and efficient springback prediction in sheet metal forming. |
2006 |
495 |
Steel |
Air bending process for load optimised profiles. |
2006 |
496 |
Steel alloy |
Steel alloy |
2005 |
497 |
Steel making |
State of the art in the control of inclusions in tire cord steels –a review. |
2006 |
498 |
Steel making |
The influnace of non-metallic inclusions physical state on effectiveness of the steel filtration process. |
2006 |
499 |
Steel making |
The concept off the liquid sampling and hot rolling method for determination of macro inclusion characteristics in steel . |
2006 |
500 |
Steel making |
Sulphide capacities of cao-sio2 –al2o3- mgo slags. |
2006 |
