NO |
SUBJECT |
TITLE |
YEAR |
401 |
Semi –solid ductile cast iron. |
Development of semi –solid ductile cast iron. |
2004 |
402 |
Semisolid |
Melting and coarsening of A356 during preheating for semisolid forming. |
2004 |
403 |
Semisolid |
Semisolid heat treatment of chromium cast iron. |
2006 |
404 |
Semi-solid |
Process window for manufacturing of semi-solid aluminum alloys. |
2004 |
405 |
Semisolid casting |
Expanding opportunities for precision sand casting .:recent advances in cold box tool design have shown potential improvements for precision sand cast cores and molds ,with these advances ,high volume metalcasting facilities can be more capital and labor efficient. |
2005 |
406 |
Semisolid casting |
Filling mould cavities at high flow velocities without turbulence. |
2005 |
407 |
Semi-solid casting |
Influence of variations in alloy composition on castability and process stability. Part2: semi-solid casting processes. |
2005 |
408 |
Semi-solid forming |
Microstructural evolution of AZ91D alloy during partial remelting. |
2005 |
409 |
Semisolid hyper eutectic |
Effect of partial remelting time on the initial carbide in semisolid structure of hyper eutectic high Cr cast iron. |
2004 |
410 |
SG cast iron |
Contribution of dual phase (alpha ,G,B) heat treatments to fatigue properties of SG cast iron . |
2005 |
411 |
Shell mould |
Intensified interfacial reactions between titanium aluminide and CaO stabilized ZrO2.
|
2004 |
412 |
Shell process |
Study on preparation of fast curing novolaks for the shell process.
|
2004 |
413 |
Shell process |
Influence of microwave irradiation on preparation of novolac resins for shell process. |
2005 |
414 |
Shell process |
Influence of microwave irradiation on the preparation of novolacs for the shell process. |
2005 |
415 |
Shrinkage |
Shrinkage morphology of Al-Si casting alloys. |
2004 |
416 |
Shrinkage |
Computer simulation of shrinkage related in metal casting –a review. |
2005 |
417 |
Shrinkage |
Modeling the thermosolutal convection, shrinkage flow and grain movement of globular equiaxed solidification using a three phase model. |
2005 |
418 |
Shrinkage porosity |
Shrinkage porosity in thin walled AM60 HPDC magnesium alloy U-shaped box. |
2004 |
419 |
Silica sand |
Improved iron casting quality through application of advanced coating technology. |
2005 |
420 |
Simulation |
Simulation of columnar-to-equiaxed transition in solidified Al-Cu alloy ingots by stochastic model. |
2005 |
421 |
Simulation |
Sensitivity analysis of macro-segregation simulation with respect to partition and diffusion coefficients. |
2004 |
422 |
Simulation |
Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation . |
2004 |
423 |
Simulation |
Development and use of simulation in the design of blown cores and moulds. |
2005 |
424 |
Simulation |
Numerical simulation for mold-filling of thin-walled aluminum alloy castings in traveling magnetic failed. |
2004 |
425 |
Slag |
Characteristics of metal droplets in slag tapped from the blast furnace. |
2006 |
426 |
Slag |
Filling mould cavities at high flow velocities without turbulence |
2006 |
427 |
slag |
Reaction between Cao-Sio2-al2o3 Slags and H2 +Hcl-H2o gas mixtures |
2006 |
428 |
Slag |
x-ray fluorescence spectrometry determination of open –hearth furnace slag by pressed powder briquetting. |
2006 |
429 |
Slag |
Reduction behaviour of BOF type slags by solid carbon. |
2006 |
430 |
sodium silicate |
Determination of size and size distribution of particles in hydrated sodium silicate and in silicate sols by photon correlation spectroscopy. |
2004 |
431 |
Sodium silicate binder. |
In house reuse and reclamation of used foundry sands with sodium silicate binder. |
2004 |
432 |
Soldering |
Die surface treatments : NADCA research in action :soldering |
2006 |
433 |
solidification |
Enhanced cooling for solidification of aluminium alloy in permanent moulds using advanced heat pipe solutions. |
2005 |
434 |
solidification |
Austenite shell evidence in ductile iron solidification. |
2004 |
435 |
solidification |
Thermal microstructural analysis of gray cast iron solidification: simulation and experimental validation. |
2005 |
436 |
solidification |
Modeling dendrite evolution under rapid solidification conditions. |
2004 |
437 |
solidification |
Sensitivity analysis of macrosegregation simulation with respect to partition and diffusion coefficients. |
2004 |
438 |
solidification |
Application of flow and solidification simulation in cast –in insertion processing. |
2005 |
439 |
Solidification |
Solidification and phase transformation in brazed aluminium alloys used in automotive heat exchangers. |
2005 |
440 |
Solidification |
Solidification structure and mechanical properties of Al-Li-Cu-Zr cast alloy. |
2004 |
441 |
Solidification |
Inverse thermal analysis method to study solidification in cast iron. |
2004 |
442 |
Solidification |
Modeling the thermosolutal convection ,shrinkage flow and grain movement of globular equiaxed solidification using a three phase model. |
2005 |
443 |
Solidification |
Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation. |
2004 |
444 |
Solidification |
Process simulation of aluminium alloy casting solidification for controlled porosity and cooling rate |
2006 |
445 |
Solidification |
Reduction behaviour of BOF type slags by carbon in iron. |
2006 |
446 |
Solidification |
Effect of chill position and size during solidification of aluminum casting. |
2005 |
447 |
Solidification |
Directional solidification of metal-eutectic and fabrication of regular porous metals. |
2005 |
448 |
Spheroidal graphite cast iron |
Modeling of manganese sulphide formation during solidification ,part 2: correlation of solidification and MnS formation . |
2006 |
449 |
Spheroidis- ation hypereutectic cast iron |
New method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron. |
2004 |
450 |
Spheroidisation |
Discussion on new method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron. |
2005 |
