NO |
SUBJECT |
TITLE |
YEAR |
251 |
Gray iron |
Grain refinement of TRIP assisted multiphase steels through strain-induced phase transformation. |
2006 |
252 |
Green sand |
Experimental investigation and numerical analysis of compaction behaviour of moulding sand. |
2004 |
253 |
Green sand |
Evaluation of green compressive strength of clay bonded moulding sand mix:neural network and neuro-fuzzy based approaches. |
2006 |
254 |
Green sand |
Green sand control : anew method of the online determination of the moulding sand moisture with infra-red spectrum |
2006 |
255 |
Green sand mould casting |
Green sand mould casting |
2005 |
256 |
Green sand moulding |
Green sand moulding |
2005 |
257 |
Greensand system |
Coal greensand systems ”a new look at a very old practice” |
2005 |
258 |
Heat pipe |
Numerical simulation of heat pipe assisted solidification |
2005 |
259 |
Heat resistance steel |
A study of microstructure and performance of quenching Fe-V-W-Mo- alloy |
2006 |
260 |
Heat resistant steel |
A study of microstructure and performance tempered Fe-V-W-Mo alloy |
2006 |
261 |
Heat resisting alloy |
Aging of cast Ni- base heat resisting alloy. |
2004 |
262 |
Heat transfer |
How do manganese, sulfur levels affect gray iron properties? |
2006 |
263 |
Heat treatment |
An assessment of vacuum- heat-treated H11 hot –work tool steel using the Klc /HRC ratio. |
2006 |
264 |
Heat treatment |
Influence of different forming and heat treatment stages on the properties of p92-sheet |
2006 |
265 |
Heat treatment |
Cast iron pipe heat treatment. |
2005 |
266 |
High chromium |
Wear characteristics of Fe-25Cr-C-B eutectic cast alloys. |
2004 |
267 |
High technology |
The effectiveness of compensation strategies in international technology intensive firms. |
2005 |
268 |
Hot box resin |
Working with hot and warm box systems. |
2005 |
269 |
Hot rolling |
Controlling heat transfer with refractory coating. |
2006 |
270 |
Hypereutectic cast iron |
Discussion on new method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron. |
2005 |
271 |
Imports |
Taking stock of casting imports : casting imports are to reach 3.2 million tons in 2006 , with 48% to be produced in asian countries. |
2006 |
272 |
Inclusion |
Discussion of theoretical methods to predict scale thickness in hot rolling strip of steel. |
2006 |
273 |
Inclusions removal |
Change of inclusion characteristics during vacuum degassing of tool steel. |
2006 |
274 |
Induction furnace |
How to minimize lining wear in coreless induction furnace when melting iron |
2006 |
275 |
Industry |
Are industries destined toward ‘productivity paradox’? : an empirical case of Korea. |
2005 |
276 |
Information management |
Set up and monitoring of the optimal operation of a cupola melting plant via an online monitoring and simulation system. |
2005 |
277 |
Information technology |
Measuring the impact of global information technology applications. |
2005 |
278 |
Inoculant |
Influence of inoculant and /or SiC addition on characteristics of gray cast iron . |
2004 |
279 |
Inoculation |
New method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron. |
2004 |
280 |
Inoculation |
Discussion on new method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron. |
2005 |
281 |
InteCAST software |
Resent developments of inte CAST software and its applications on special castings. |
2005 |
282 |
Inverse kinetic analysis |
Inverse kinetic analysis method to study eutectic growth. |
2005 |
283 |
Investment casting |
Advances in investment casting of Ti-6Al-4V alloy :a review |
2006 |
284 |
Investment casting |
Research on investment casting liquid ceramic slurry. |
2005 |
285 |
Investment casting |
Rapid precision casting for complex thin-walled aluminum alloy parts. |
2004 |
286 |
Investment casting |
Investment casting of magnesium alloys. |
2005 |
287 |
Investment casting. |
Modeling study of inclusions removal by bubble flotation in the tundish. |
2006 |
288 |
Iron alloy |
Iron alloy |
2005 |
289 |
Iron making |
Data –driven modeling of quality and performance indices in sinter making |
2006 |
290 |
Iron making |
Characteristics of metal droplets in slag tapped from the blast furnace. |
2006 |
291 |
Iron making |
Modeling noisy blast furnace data using genetic algorithms and neural networks. |
2006 |
292 |
Iron making |
Fractal model for evaluating heat transfer of high temperature porous corundum shell in vacuum investment casting. |
2006 |
293 |
Iron making |
Reaction between Cao-Sio2-al2o3 Slags and H2 +Hcl-H2o gas mixtures |
2006 |
294 |
Iron making |
Effect of ca (II) – ion wustite on its reduction to iron |
2006 |
295 |
Iron making |
Iron making out thin – wall casting defects: low – density alumina silicate has been effective in producing thin wall iron casting . by constructing “gate extensions” it can now be used more efficiently. |
2006 |
296 |
kaolin |
Fireclay refractories from Ugandan kaolinitic minerals |
2006 |
297 |
Knowledge management |
A measurement scale for knowledge management in the biotechnology and telecommunications industries. |
2005 |
298 |
Knowledge management |
Knowledge and technology transfer grid: empirical assessment. |
2005 |
299 |
Large – eddy simulations |
Large – eddy simulations and particle – image velocimetry of tundish flow |
2006 |
300 |
LC-steel |
Re-evaluation of the optimal operating conditions for the primary end of an integrated steel plant using multi-objective genetic algorithms and nash equilibrium. |
2006 |
