NO |
SUBJECT |
TITLE |
YEAR |
101 |
Ceramics |
Solid freeform fabrication of ceramics. |
2003 |
102 |
Chemical analysis
|
Comparative study of oxide speciation in steel by inert gas fusion technique |
2006 |
103 |
Chinese software industry |
Software industry in the fastest emerging market: challenges and opportunities. |
2005 |
104 |
Choromate |
Comparison of hot rolled textures in different grades of high formable steels. |
2006 |
105 |
Chromite |
Investigation of the effects of some parameters in the production of chromate from chromite ores in iskenderun region. |
2006 |
106 |
Chromium cast iron |
Semisolid heat treatment of chromium cast iron. |
2006 |
107 |
Cleaning and finishing operations. |
Mining a domestic source of chromite :A mineral deposit in organ is being development to be a significant source of chromite sand for U.S. metal casting facilities , offering a cost –effective alternative to the current south African chromite choices. |
2006 |
108 |
C-Mn steel |
A physical analysis of the stress relaxation kinetics of deformed austenite in C-Mn steel |
2006 |
109 |
CO2 –sand moulds
|
Finite element modeling of thermal behavior of hollow cylinders cast in CO2 –sand moulds.
|
2004 |
110 |
Coating |
Consolidating your cleaning room :by implementing new designs and practice ,two steel caster anticipate improvement in their cleaning and finishing operations. |
2005 |
111 |
Coating |
Improved iron casting quality through application of advanced coating technology. |
2005 |
112 |
Commodity supply |
Raw materials shortage –a lasting theat?
|
2004 |
113 |
Commodity supply |
Controlling our natural consumables.
|
2004 |
114 |
Commodity supply |
Raw materials shortage –a lasting theat?
|
2004 |
115 |
Compacted graphite cast iron |
Cross sectorial technology transfer of 5 –axis machining protocols into tool making for the injection moulding of nano –coated polymer glazing for the automotive sector |
2006 |
116 |
Composite |
Tribological characteristics of compacted graphite cast iron in dry sliding condition . |
2006 |
117 |
Computer simulation |
Computer simulation of shrinkage related in metal casting –a review. |
2005 |
118 |
Continuous casting |
Studies of the solid –liquid interface location during heated mould continuous casting of metal and alloys. |
2005 |
119 |
Continuous casting |
Effect of electromagnetic brake on fluid flow in continuous slab casting mould . |
2005 |
120 |
Continuous casting |
Competitive growth of grains in ZA alloys during continuous casting with heated mould. |
2005 |
121 |
Continuous casting |
Heat transfer through the copper plate of slab moulds. |
2006 |
122 |
Continuous casting |
Analysis of solute distribution during the solidification of low alloyed steels. |
2006 |
123 |
Continuous casting |
Effect of nozzle base material on the rate of clogging during the continuous casting of aluminium –killed steels. |
2006 |
124 |
Continuous casting |
Water modeling experiments of argon bubbling curtain in a slab continuous casting tundish |
2006 |
125 |
Continuous casting |
Assessment of the primary structure of slabs and the influence on hot- and cold –rolled strip structure. |
2006 |
126 |
Continuous casting |
Solidification microstructure in a short fiber reinforced alloy composite containing different fiber fractions. |
2006 |
127 |
Continuous casting |
Hydrogen potential sources in refractory materials during steel casting. |
2006 |
128 |
Continuous casting |
Numerical study on mould powder entrapment caused by vortexing in a continuous casting process. |
2006 |
129 |
Continuous casting |
Capitalizing on current attributes. |
2005 |
130 |
Continuous casting |
Technology for brass and bronze alloy sections. |
2005 |
131 |
Continuous casting |
An economic case for a new future.
|
2005 |
132 |
Continuous casting |
Continuous casting of copper wire rods.`
|
2005 |
133 |
Continuous casting |
Analysis on solute redistribution and centerline segregation in continuously cast thin slab.
|
2004 |
134 |
Continuous casting |
The mechanism of hot crack formation in Ti-8Al-4V during cold crucible continuous casting. |
2004 |
135 |
Continuous casting |
Capitalizing on current attributes.
|
2005 |
136 |
Continuous casting |
Technology for brass and bronze alloy sections.
|
2005 |
137 |
Continuous casting |
An economic case for a new future.
|
2005 |
138 |
Continuous casting |
Analysis on solute redistribution and centerline segregation in continuously cast thin slab. |
2004 |
139 |
Continuous casting |
The mechanism of hot crack formation in Ti-8Al-4V during cold crucible continuous casting.
|
2004 |
140 |
Continuous casting |
Large – eddy simulations and particle – image velocimetry of tundish flow |
2006 |
141 |
Copper |
Measurements and modeling of air gap formation in Cu-based alloy. |
2005 |
142 |
Copper |
Heat transfer through the copper plate of slab moulds. |
2006 |
143 |
Copper |
Analysis of the deoxidation process of copper using an electrochemical cell |
2006 |
144 |
copper |
A model for predicting the melt temperature in the ladle and the tundish as a function of operating parameters during continuous casting |
2006 |
145 |
Copper – base alloys |
Copper – base alloys |
2005 |
146 |
Copper –based alloys |
Horizontal continuous casting of copper –based alloys. |
2005 |
147 |
Core |
Die cast copper rotors improve motor efficiency |
2006 |
148 |
Core making |
Benefits of organic sand binders in the core making process. |
2005 |
149 |
Core making |
Getting to the core of the problem. |
2005 |
150 |
Core making |
Odourless cold-box cores |
2005 |
