NO |
SUBJECT |
TITLE |
YEAR |
|
501 |
Steel making |
Effect of selenium on supersaturation in aluminium deoxidized molten iron. |
2006 |
|
502 |
Steel making |
Mathematical model for growth and removal of inclusions in molten steel under gas-stirring conditions. |
2006 |
|
503 |
Steel making |
Mathematical modeling of molten steel flow process in a whole RH degasser during the vacuum circulation refining process :mathematical model of the flow |
2006 |
|
504 |
Steel making |
Modeling noisy blast furnace data using genetic algorithms and neural networks.the effect of nozzle diameter, lance height and flow rate on penetration depth in a top –blown water model. |
2006 |
|
505 |
Steel making |
Mathematical modeling of molten steel flow process in a whole RH degasser during the vacuum circulation refining process : application of the model and results. |
2006 |
|
506 |
Steel making |
Consolidating your cleaning room :by implementing new designs and practice ,two steel caster anticipate improvement in their cleaning and finishing operations.
|
2006 |
|
507 |
Steel making |
Carbon solubility and phase composition of silicomanganese. |
2006 |
|
508 |
Steel making |
A physical model stuy of swirl phenomena in a top blown bath. |
2006 |
|
509 |
Steel making |
Studies on dephosphorisation of steel in induction furnace. |
2006 |
|
510 |
Steel making |
Mathematical modeling of magnesia carbon refractories reactions with steel . |
2006 |
|
511 |
Steel making |
Reduction behaviour of BOF type slags by solid carbon. |
2006 |
|
512 |
Steel making |
Reduction behaviour of BOF type slags by carbon in iron. |
2006 |
|
513 |
Steel making |
Dissolution kinetics of cored wire in molten steel |
2006 |
|
514 |
Steel making |
The use of the LSHR sampler to determine total oxygen contents in the ladle and tundish for different steel grades. |
2006 |
|
515 |
Steel making |
Influence of deformation degree on the evaluation of macroscopic oxide cleanness |
2006 |
|
516 |
Strain induced melt activation |
Effect of SIMA processing on the microstructure and wear characteristics of Al-Cu and Zn-Al alloy |
2006 |
|
517 |
Surface composite |
Fe-WC surface composites produced by reactive cast-infiltration. |
2004 |
|
518 |
Technology managers |
Technological innovation as responding to business-case study and theorization. |
2005 |
|
519 |
Thermal behavior |
Finite element modeling of thermal behavior of hollow cylinders cast in CO2 –sand moulds. |
|
|
520 |
Thermo –mechanically processing |
Control and engineering of non-metallic inclusions belonging to x Sio2 –yCao-zAl2o3 system in ca-treated Al-killed and Al-Si-killed steel. |
2006 |
|
521 |
thin – wall |
Iron making out thin – wall casting defects: low – density alumina silicate has been effective in producing thin wall iron casting . by constructing “gate extensions” it can now be used more efficiently. |
2006 |
|
522 |
Thin section
|
Fluidity of eutectic gray iron and Al-Si alloy in thin section . |
2004 |
|
523 |
Thin sections |
Fluidity of eutectic gray iron in thin sections. |
2004 |
|
524 |
Thin wall |
Shrinkage porosity in thin walled AM60 HPDC magnesium alloyU-shaped box. |
2004 |
|
525 |
Thin wall |
Process and die engineering of thin walled aluminum die casting. |
2006 |
|
526 |
Thin wall ductile iron |
Gating system design to cast thin wall ductile iron plates. |
2006 |
|
527 |
Thixoforging |
This structure and properties of a thermo –mechanically processed low carbon high strength steel. |
2006 |
|
528 |
Thixoforging |
Section of suitable tool materials and development of tool concepts for the thixoforging of steels. |
2006 |
|
529 |
Thixo-goining |
Thixo –forging and thixo-goining of an intergrated product. |
2006 |
|
530 |
Ti-6Al-4V alloy |
Advances in investment casting of Ti-6Al-4V alloy :a review |
2006 |
|
531 |
Titanium |
Intensified interfacial reactions between titanium aluminide and CaO stabilized ZrO2. |
2004 |
|
532 |
Titanium alloy |
Thixo –forging and thixo-goining of an intergrated product. |
2006 |
|
533 |
Titanium alloy |
Future of titanium alloy casting |
|
|
534 |
Tool steel |
Effect of processing parameters on the surface quality of directionally solidified titanium alloy slab with cold crucible |
2006 |
|
535 |
Tundish |
Change of inclusion characteristics during vacuum degassing of tool steel. |
2006 |
|
536 |
Wear |
Wear characteristics of Fe-25Cr-C-B eutectic cast alloys. |
2004 |
|
537 |
wear |
Effect of SIMA processing on the microstructure and wear characteristics of Al-Cu and Zn-Al alloy. |
2006 |
|
538 |
Wear resistance |
Enhanced wear resistance of cast ductile iron by Ni-Sic composite coating. |
2005 |
|
539 |
Welding |
Modeling study of inclusions removal by bubble flotation in the tundish. |
2006 |
|
540 |
Welding |
FEM study of fatigue response of 3-sheet spot welded joints |
2006 |
|
541 |
Welding |
Fatigue crack propagation in friction stir welded and parent AA6082. |
2006 |
|
542 |
Wheel wash |
Modular wheel wash system. |
2004 |
|
543 |
Wire rod |
Weld metal microstructure prediction in submerged arc weld metal of C-Mn steel. |
2006 |
|
544 |
X-ray |
Numerical simulation and X-ray direct observation of mould filling during vacuum suction casting. |
2005 |
|
545 |
X-ray fluorescence spectrometry |
Behaviour of surface defects in wire rod rolling. |
2006 |
|
546 |
zinc |
Die cast zinc |
2005 |
|
547 |
Zn –Al alloy |
Competitive growth of grains in ZA alloys during continuous casting with heated mould. |
2005 |
|
548 |
Zn-Al alloy |
Effect of SIMA processing on the microstructure and wear characteristics of Al-Cu and Zn-Al alloy. |
2006 |
