|
NO |
SUBJECT |
TITLE |
YEAR |
1 |
A356 |
Melting and coarsening of A356 during preheating for semisolid forming. |
2004 |
2 |
A356alloy |
Effect of grain refinement and dissolved hydrogen on the fluidity of A356alloy. |
2005 |
3 |
A356aluminium alloy |
Simulation of microporosity in A356aluminium alloy castings. |
2005 |
4 |
Aging |
Aging of cast Ni- base heat resisting alloy. |
2004 |
5 |
Air duet |
Discussion on compact mechanism of air-stream and syncro-formed clamp plate impact molding. |
2004 |
7 |
Al alloy |
Critical assessment of reduced pressure test. Part1:porosity phenomena |
2004 |
8 |
Al alloy |
Critical assessment of reduced pressure test. Part2:quantification. |
2004 |
9 |
Al and Mg alloy |
Influence of variations in alloy composition on castability and process stability. Part 1:gravity and pressure casting processes |
2005 |
10 |
Al and Mg alloy |
Influence of variations in alloy composition on castability and process stability. Part2: semi-solid casting processes. |
2005 |
11 |
Al –Si |
Prediction of microprosity in Al –Si casting in low pressure permanent mould casting using criteria functions. |
2004 |
12 |
Al-12Si alloy |
Effect of grain refiner and modifier on the wear behaviour of Al-12Si alloy. |
2005 |
13 |
Al-5Mg alloy |
Morphology of oxide films of Al-5Mg alloy in dynamics in casting |
2005 |
14 |
Al-5Si-1Cu alloy |
Effect of dendrite arm spacing on cleavage fracture toughness of Al-5Si-1Cu alloy. |
2004 |
15 |
Al-7Si-Mg alloy |
Oxide film characteristics af Al-7Si-Mg alloy in dynamic conditions in casting |
2004 |
16 |
Al-Cu alloy |
Simulation of columnar-to-equiaxed transition in solidified Al-Cu alloy ingots by stochastic model. |
2005 |
17 |
Al-Cu alloy |
Effect of SIMA processing on the microstructure and wear characteristics of Al-Cu and Zn-Al alloy. |
2006 |
18 |
Al-Cu-Mg alloy |
Effect of track Ag on the microstructure and precipitation of an Al-Cu-Mg alloy |
2006 |
19 |
Al-Li-Cu-Zr cast alloy |
Solidification structure and mechanical properties of Al-Li-Cu-Zr cast alloy. |
2004 |
20 |
Al-Mg-Si alloy |
x-ray fluorescence spectrometry determination of open –hearth furnace slag by pressed powder briquetting. |
2006 |
21 |
Al-Mg-Si alloys |
Fluidity evaluation methods for Al-Mg-Si alloys. |
2006 |
22 |
Al-Si alloy |
Fluidity of eutectic gray iron and Al-Si alloy in thin section . |
2004 |
23 |
Al-Si alloy |
Net –shape formation of hypereutectic Al-Si alloy by thixocasting of gas-atomised powder performs. |
2004 |
24 |
Al-Si alloy |
Effect of electric current on the cast microstructure of Al-Si alloy |
2005 |
25 |
Al-Si alloys |
Role of Si particle damage on fatigue characteristics of cast Al-Si alloys. |
2004 |
26 |
Al-Si casting alloys |
Shrinkage morphology of Al-Si casting alloys. |
2004 |
27 |
Aluminium |
Relative porosity in aluminium and in aluminium alloys. |
2005 |
28 |
Aluminium |
Solidification and phase transformation in brazed aluminium alloys used in automotive heat exchangers. |
2005 |
29 |
Aluminium |
Measurements and modeling of air gap formation in aluminium based alloy. |
2005 |
30 |
aluminium |
Fatigue crack propagation in friction stir welded and parent AA6082. |
2006 |
31 |
Aluminium |
Space frame propels ford GT: permanent mold casting produced the key structural components for the aluminium spacer frame in ford s new GT model |
2006 |
32 |
Aluminium |
Finding new strength in aluminium: fuel efficiency-driven reduction issues in heavy –duty transportation have made high-strength aluminium alloy ,such as A206,,desirable alternatives to A356. |
2005 |
33 |
Aluminium |
Filling mould cavities at high flow velocities without turbulence |
2006 |
34 |
Aluminium -Mg alloy |
Effect of Si additions and heat treatment on the mechanical behaviour of an Al-5Mg casting alloy. |
2004 |
35 |
Aluminium alloy |
Effect of grain refining and Sr modification on prefil measurement sensitivity in 356 alloys using electron probe microanalysis technique. |
2004 |
36 |
Aluminium alloy |
Numerical modeling of entrainment of oxide film defects in filling of aluminium alloy castings. |
2004 |
37 |
Aluminium alloy |
Cooling rate effect on entrapment of short alumina fibers into aluminium alloy. |
2004 |
38 |
Aluminium alloy |
Enhanced cooling for solidification of aluminium alloy in permanent moulds using advanced heat pipe solutions. |
2005 |
39 |
aluminium alloy |
Numerical simulation and X-ray direct observation of mould filling during vacuum suction casting. |
2005 |
40 |
Aluminium alloy |
Production of Al-alloy wheel casting and minimizing the air-leak rejection. |
2006 |
41 |
Aluminium alloy |
Effect of cooling rate on air gap formation in aluminium alloy permanent mould casting. |
2006 |
42 |
Aluminium alloy |
Process simulation of aluminium alloy casting solidification for controlled porosity and cooling rate |
2006 |
43 |
Aluminium alloy |
Heat treatment of natural aluminium casting alloy. |
2006 |
44 |
Aluminium alloy AlSi7mg |
Controlling aluminium gas porosity . |
2006 |
45 |
Aluminium engine block |
Solidification analysis of aluminium engine block. |
2004 |
46 |
Aluminium –killed steels. |
Effect of nozzle base material on the rate of clogging during the continuous casting of aluminium –killed steels. |
2006 |
47 |
Aluminium piston alloy |
Microstructure and strength of a squeeze cast aluminium piston alloy composite reinforced with alumina short fibre using al2o3 binder. |
2004 |
48 |
Aluminum |
Comparison of infiltration of Al-Cu-Si 0.12 Al2O3 composites and maximum fluidity length of un-reinforced matrix alloy. |
2004 |
49 |
Aluminum |
Campbellology for Ferrari |
2005 |
50 |
Aluminum |
Ensuring quality prior to pouring : of the various aspects oh the aluminum casting production process the quality of the molten metal is perhaps the most controllable |
2006 |
