جامعه ریخته گران ایران

گروه كتابخانه و اطلاع رساني - آرشيو كتابخانه - هندبوك‌ها (HANDBOOKS)

رديف	عنوان
1.	Metals Handbook: vol.1: properties and selection of metals - 8^th Ed.
2.	Metals Handbook: vol.2: heat treating, cleaning and finishing - 8^th Ed.
3.	Metals Handbook: vol.3: machining - 8^th Ed.
4.	Metals Handbook: vol.4: forming - 8^th Ed.
5.	Metals Handbook: vol.5: forging and casting - 8^th Ed.
6.	Metals Handbook: vol.6: welding and brazing - 8^th Ed.
7.	Metals Handbook: vol.7: atlas of microstructures of industrial alloys - 8^th Ed.
8.	Metals Handbook: vol.8: metalography, structures and phase diagrams - 8^th Ed.
9.	Metals Handbook: vol.9: fractography and atlas of fractographs - 8^th Ed.
10.	Metals Handbook: vol.10: failure analysis and prevention - 8^th Ed.
11.	Metals Handbook: vol.11: nondestructive inspection and quality control - 8^th Ed.
12.	Metals Handbook: Desk edition - 2^th Ed.
13.	Metals Handbook: Desk edition
14.	Metals Handbook: vol.15: casting - 9^th Ed.
15.	Metals Handbook: vol.1: properties and selection: irons and steels - 9^th Ed.
16.	Metals Handbook: vol.4: heat treating – 9^th Ed.
17.	Metals Handbook: vol.5: surface cleaning, finishing and casting – 9^th Ed.
18.	Metals Handbook: vol.7: powder metallurgy – 9^th Ed.
19.	Metals Handbook: vol.9: metallugraphy and microstructures – 9^th Ed.
20.	Metals Handbook: vol.1: properties and selection: irons, steels, and high-performance alloys – 10^th Ed.
21.	Metals Handbook: vol.2: properties and selection: nonferrous alloys and special-purpose materials – 10^th Ed.
22.	Metals Handbook: vol.3: alloy phase diagrams – 10^th Ed.
23.	Metals Handbook: vol.4: heat reating – 10^th Ed.
24.	Metals Handbook: vol.9: metallugraphy and microstructures – 10^th Ed.
25.	Metals Handbook: vol.10: materials caracterization – 10^th Ed.
26.	Metals Handbook: vol.14: forming and forging – 10^thEd.
27.	Metals Handbook: vol.15: casting – 10^th Ed.
28.	Metals Handbook: vol.17: nondestructive evaluation and quality control – 10^th Ed.
29.	Metals Handbook: vol.19: fatigue and fracture – 10^th Ed.
30.	Metals Handbook: vol.20: materials selection and design – 10^th Ed.

Metals Handbook: vol.1: properties and selection of metals - 8th Ed.

Metals Handbook: vol.2: heat treating, cleaning and finishing - 8th Ed.

Metals Handbook: vol.3: machining - 8th Ed.

Metals Handbook: vol.4: forming - 8th Ed.

Metals Handbook: vol.5: forging and casting - 8th Ed.

Metals Handbook: vol.6: welding and brazing - 8th Ed.

Metals Handbook: vol.7: atlas of microstructures of industrial alloys - 8th Ed.

Metals Handbook: vol.8: metalography, structures and phase diagrams - 8th Ed.

Metals Handbook: vol.9: fractography and atlas of fractographs - 8th Ed.

Metals Handbook: vol.10: failure analysis and prevention - 8th Ed.

Metals Handbook: vol.11: nondestructive inspection and quality control - 8th Ed.

Metals Handbook: Desk edition - 2th Ed.

Metals Handbook: Desk edition

Metals Handbook: vol.15: casting - 9th Ed.

Metals Handbook: vol.1: properties and selection: irons and steels - 9th Ed.

Metals Handbook: vol.4: heat treating – 9th Ed.

Metals Handbook: vol.5: surface cleaning, finishing and casting – 9th Ed.

Metals Handbook: vol.7: powder metallurgy – 9th Ed.

Metals Handbook: vol.9: metallugraphy and microstructures – 9th Ed.

Metals Handbook: vol.1: properties and selection: irons, steels, and high-performance alloys – 10th Ed.

Metals Handbook: vol.2: properties and selection: nonferrous alloys and special-purpose materials – 10th Ed.

Metals Handbook: vol.3: alloy phase diagrams – 10th Ed.

Metals Handbook: vol.4: heat reating – 10th Ed.

Metals Handbook: vol.9: metallugraphy and microstructures – 10th Ed.

Metals Handbook: vol.10: materials caracterization – 10th Ed.

Metals Handbook: vol.14: forming and forging – 10th Ed.

Metals Handbook: vol.15: casting – 10th Ed.

Metals Handbook: vol.17: nondestructive evaluation and quality control – 10th Ed.

Metals Handbook: vol.19: fatigue and fracture – 10th Ed.

Metals Handbook: vol.20: materials selection and design – 10th Ed.

Metals Handbook: vol.1: properties and selection of metals - 8^th Ed.

Metals Handbook: vol.2: heat treating, cleaning and finishing - 8^th Ed.

Metals Handbook: vol.3: machining - 8^th Ed.

Metals Handbook: vol.4: forming - 8^th Ed.

Metals Handbook: vol.5: forging and casting - 8^th Ed.

Metals Handbook: vol.6: welding and brazing - 8^th Ed.

Metals Handbook: vol.7: atlas of microstructures of industrial alloys - 8^th Ed.

Metals Handbook: vol.8: metalography, structures and phase diagrams - 8^th Ed.

Metals Handbook: vol.9: fractography and atlas of fractographs - 8^th Ed.

Metals Handbook: vol.10: failure analysis and prevention - 8^th Ed.

Metals Handbook: vol.11: nondestructive inspection and quality control - 8^th Ed.

Metals Handbook: Desk edition - 2^th Ed.

Metals Handbook: vol.15: casting - 9^th Ed.

Metals Handbook: vol.1: properties and selection: irons and steels - 9^th Ed.

Metals Handbook: vol.4: heat treating – 9^th Ed.

Metals Handbook: vol.5: surface cleaning, finishing and casting – 9^th Ed.

Metals Handbook: vol.7: powder metallurgy – 9^th Ed.

Metals Handbook: vol.9: metallugraphy and microstructures – 9^th Ed.

Metals Handbook: vol.1: properties and selection: irons, steels, and high-performance alloys – 10^th Ed.

Metals Handbook: vol.2: properties and selection: nonferrous alloys and special-purpose materials – 10^th Ed.

Metals Handbook: vol.3: alloy phase diagrams – 10^th Ed.

Metals Handbook: vol.4: heat reating – 10^th Ed.

Metals Handbook: vol.9: metallugraphy and microstructures – 10^th Ed.

Metals Handbook: vol.10: materials caracterization – 10^th Ed.

Metals Handbook: vol.14: forming and forging – 10^thEd.

Metals Handbook: vol.15: casting – 10^th Ed.

Metals Handbook: vol.17: nondestructive evaluation and quality control – 10^th Ed.

Metals Handbook: vol.19: fatigue and fracture – 10^th Ed.

Metals Handbook: vol.20: materials selection and design – 10^th Ed.